Send SMS
Contact Us

2.4GHz RF Wireless Transreveiver Module

TB6560 Stepper Motor Driver Board 3A

TB6560 Stepper Motor Driver Board 3A

Approx. Rs 520 / Piece


CNC Router Single Axis 3A Stepper Motor driver board is for axis control with Input signal high-speed opto-coupler isolation, large heat sink to ensure good heat dissipation. Stepper motor driver is Semi-flow mode adjustable, semi-flow current adjustable,with a variety of semi-flow model and semi-flow current setting functions.


Technical specifications & features:

 

XBee 2MW Wire Antenna - Series 2C

XBee 2MW Wire Antenna - Series 2C

Approx. Rs 800 / Piece

Bee ZB / ZigBee modules provide cost-effective wireless connectivity to devices in ZigBee mesh networks. Utilizing the ZigBee PRO Feature Set, these modules are interoperable with other ZigBee devices, including devices from other vendors. The most common factor in determining whether to use ZB is the potential need to tie-in with other ZigBee-compatible networks or mesh networking. If this is not a requirement, the series 1 802.15.4 modules may be perfectly suitable for your project.

Features:

Application Ideas:

Key Specifications

Note: Because XBee modules have 2 mm pin spacing, we recommend one of our adapter boards for each module. Our adapter boards provide several advantages to the XBee modules such breadboard-friendly standard 0.1 inch pin spacing, mounting holes, and easy-to-solder connections. Even if you are communicating point-to-point without a PC, we still recommend that you always have at least one XBee USB Adapter Board (# 32400) so you can easily configure and test each XBee module prior to putting it in a point-to-point application.


Additional Information:

Xbee Pro S2c 63mw Wire Antenna S1

Xbee Pro S2c 63mw Wire Antenna S1
  • Xbee Pro S2c 63mw Wire Antenna S1
  • Xbee Pro S2c 63mw Wire Antenna S1

Approx. Rs 1,900 / Piece

Digi XBee 802.15.4 modules are easy to use, reliable RF devices. The 802.15.4 XBee modules provide two friendly modes of communication – a simple serial method of transmit/receive or a framed mode providing advanced features. XBees are ready to use out of the package, or they can be configured through the X-CTU utility or from your microcontroller. These modules can communicate point to point, from one point to a PC, or in a mesh network.


Digi International move both the Series 1 and Series 2 functionality to the S2C hardware. This new variant is functionally and OTA compatible with the legacy XBee S1 802.15.4 and introduces several major advantages including reduced power consumption, better range and receive sensitivity, support for over-the-air firmware updates, and provides an upgrade path to DigiMesh® or ZigBee® mesh protocols if desired.


This XBee model is as replacement/upgrade for the XB24-AWI-001.


Additional Information:

Xbee Pro S2c 63mw Wire Antenna S2

Xbee Pro S2c 63mw Wire Antenna S2
  • Xbee Pro S2c 63mw Wire Antenna S2
  • Xbee Pro S2c 63mw Wire Antenna S2

Approx. Rs 1,800 / Piece

XBee ZB / ZigBee modules provide cost-effective wireless connectivity to devices in ZigBee mesh networks. Utilizing the ZigBee PRO Feature Set, these modules are interoperable with other ZigBee devices, including devices from other vendors.


The ZB modules requires considerable setup and configuration. XBee Series 1 (802.15.4) and XBee Series 2 (ZB / ZigBee) modules have the same pin-out. However, Series 1 modules cannot communicate with Series 2 modules.


Digi International move both the Series 1 and Series 2 functionality to the S2C hardware. This XBee S2C model is as replacement/upgrade for the XBP24BZ7WIT-004.


Additional Information:

XBEE Explorer USB Module

XBEE Explorer USB Module

Approx. Rs 250 / Piece

Interfacing Board used to interface ZigBee wireless Module with Desktop or Laptop computer systems.With the aid of our XBEE Explorer USB customers can easily communicate between PC to PC or PC to embedded boards. These Explorer are highly suitable for changing the modules of varied devices using PC through USB port. This Explorer works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. We have equipped the adapters with five indicator LED's for depicting the status of the data being received or transmitted, power, signal strength of the recipient and other associated data. As ZigBee communicates through Serial Communication so other end of USB which is connected to PC, treated as COM port for Serial Communication. It is provided with indication LEDs for ease.

 

 


Additional Information:

XBEE Pro S2C 63MW RPSMA S2 Module

XBEE Pro S2C 63MW RPSMA S2 Module
  • XBEE Pro S2C 63MW RPSMA S2 Module
  • XBEE Pro S2C 63MW RPSMA S2 Module

Approx. Rs 2,300 / Piece


XBee Pro 63mW RPSMA - Series 2C (ZigBee Mesh) is ZigBee RF modules provide cost effective wireless connectivity to electronic devices. They are interoperable with other ZigBee PRO feature set devices. Embedded ZigBee RF modules provide OEMs with a simple way to integrate mesh technology into their application. The XBee-PRO ZigBee RF Modules provide wireless connectivity to end-point devices in ZigBee mesh networks. Using the ZigBee PRO Feature Set, these modules are inter-operable with other ZigBee devices. With the XBee, users can have their ZigBee network up-and-running in a matter of minutes without configuration or additional development.

XBee and XBee-PRO ZigBee modules are ideal for applications in the energy and controls markets where manufacturing efficiencies are critical. The Serial Peripheral Interface (SPI) provides a high-speed interface and optimizes integration with embedded microcontrollers, lowering development costs and reducing time to market. Products in the XBee family require little to no configuration or additional development. Programmable versions of the XBee and XBee-PRO ZigBee module make customizing applications easy. Programming directly on the module eliminates the need for a separate processor. Because the wireless software is isolated, applications can be developed with no risk to RF performance or security.

Specification of XBee Pro 63mW RPSMA - Series 2C (ZigBee Mesh)

 


Additional Information:

XBEE Pro S2C 63MW U.FL S2 Module

XBEE Pro S2C 63MW U.FL S2 Module

Approx. Rs 2,300 / Piece

This is the XBee XBP24CZ7WIT-004 module from Digi. The new Series 2C improves upon the power output and data protocol of the Pro Series2. Series 2C modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.

 

The XBee/XBee-PRO ZB (S2C) introduces the SPI serial interface to Digi’s through-hole ZigBee radio. Please refer to the XBee/XBee-PRO ZB (S2C) product manual for more information.

 

Features:


Additional Information:

RFM22B FSK Transreceiver Module

RFM22B FSK Transreceiver Module

Approx. Rs 450 / Number

Description: Coming in frequency range of 433/868/915MHz ISM bands, these RFM22B FSK Transreceiver choices come with sensitivity of –121 dBm and output power range of +20 dBm Max. With low power consumption, some of its working features include low power shutdown mode, digital RSSI, wake-up timer, auto-frequency calibration (AFC), power-on-reset (POR) among others. Further, this RFM22B Transceiver delivers data rate of 0.123 to 256 kbps, antenna diversity and TR switch control, configurable packet handler, TX and RX 64 byte FIFOs, on-chip crystal tuning, 14-PIN DIP 16-PIN SMD package and low cost operations.

Wireless RFM75 Module Transceiver

Wireless RFM75 Module Transceiver

Approx. Rs 125 / Piece


Description: RFM75 is a low-power, high-speed FSK/GFSK transceiver module specifically operating in the world wide ISM frequency band at 2400 - 2483.5 MHz. RFM75 module features low cost, small size, high stability and good consistency. The maximum air data rate can be up to 2Mbps. It can be widely applied in various wireless connections in daily life or activities. It is compliant with the specifications regulated and required by FCC and ETSI.

 


Additional Information:

NRF24L01 Module

NRF24L01 Module

Approx. Rs 80 / Piece

This module based on Nordic nRF24L01, highly integrated, ultra low power (ULP) 2Mbps RF transceiver for the 2.4GHz ISM (Industrial, Scientific and Medical) band. Nordic nRF24L01 integrates a complete 2.4GHz RF transceiver, RF synthesizer, and baseband logic including the Enhanced ShockBurst™ hardware protocol accelerator supporting a high-speed SPI interface for the application controller. FeaturesSpecifications

Easy To Use Wireless RF CC2500 Transceiver

Easy To Use Wireless RF CC2500 Transceiver

Approx. Rs 400 / Piece

Description: Supporting multiple baud rates of 4800/9600/19200/38400, these Wireless RF CC2500 Transceiver work on ISM band (2. 4 ghz) reserved internationally that do not require any license. These Wireless RF CC2500 Transceiver also support multiple frequencies within same band rate that helps in avoiding data collision with no requirement of complex wireless connection software for connecting to serial devices. Further, these wireless RF CC2500 Transreceiver do not require external antenna and work on 5-9v DC supply with standard uart interface. Suitable for transmitting and receiving data at multiple baud rates, the module is direct line in replacement for serial communication and finds applications for wireless sensor network, wireless device control, wireless data transfer, wireless energy metering, robotics, wireless data logger and others.

 

 

 


Additional Information:

RFM23BP RF Transceiver

RFM23BP RF Transceiver

Approx. Rs 750 / Piece


Description: Available in frequency range of 433/868/915MHz ISM bands, these RFM23BP RF Transceiver choices come with sensitivity of –120 dBm, output power range of +30 dBm Max (RFM23BP) and low power consumption of 25 mA receive & 550 mA @ +30 dBm transmit. Some of its working specifications include data rate of 0.123 to 256 kbps, ultra low power shutdown mode, digital RSSI, auto-frequency calibration (AFC) support, antenna diversity and TR switch control, preamble detector, low battery detector, integrated voltage regulators and frequency hopping capabilities. Some of its applications include in remote control, home security & alarm, telemetry, personal data logging, tire pressure monitoring, wireless PC peripherals, remote keyless entry, sensor networks among others.

 


 


Additional Information:

Wireless RF Module CC2500 2.4GHz

Wireless RF Module CC2500 2.4GHz

Approx. Rs 150 / Piece

Description: Wireless RF Module CC2500 2.4GHz options is suitable for delivering clear channel assessment, data buffering, wake on radio, burst transmissions, link quality indication. Further, it comes with option of Manchester coding of data stream by modulator and decoded by demodulator. Some of its end usage areas include Consumer Electronics, Wireless audio & game controllers as well as in other wireless systems. Some of its working specifications include low current consumption, efficient SPI interface, operating temperature range from -40 to 85, available frequency of 2.4 to 2.483 GHz, Hi sensitivity of -101dBm @10kbps among others. CC2500 2.4GHz have powerful digital features also support building high-performance RF system support.

Features:

 


Additional Information:

Wireless Modules NRF24L01 2.4G (with antenna)

Wireless Modules NRF24L01 2.4G  (with antenna)

Approx. Rs 250 / Piece

Product DescriptionNRF24L01P + PA + LNA Division I for the ultra-long-distance data transmission specially developed high-power and high sensitivity wireless module 2.4G ISM band NRF24L01P + PA + LNA wireless module to work in the license-free, can be point-to-point applications, can also be composed of a star network,

NRF24L01P + PA + LNA wireless module core Norway NORDIC company's latest high-performance wireless
Digital transmission chip NRF24L01 + with the Division of Professional Design professional full two-way RF power amplifier high power PA and LNA chip, RF switches, bandpass filters, etc., makes effective communication distance greatly expand.

RF part, the Secretary has done a lot of optimization matching debugging, the emission efficiency to achieve the highest harmonic minimum

NRF24L01P + PA + LNA wireless module of RF interference to the external equipment reaches a minimum, while not susceptible to interference from other devices, greatly Uploader
High stability of the work.

NRF24L01P + PA + LNA wireless module integration is extremely high, the size of only 41mm * 15.5mm, convenient embed.

Item Specifications:
X
Provide Us More Details
Is this Requirement:

One Time Regular

How soon do you want this:

Immediate After 1 month

Purpose of Requirement:

Reselling End Use Raw Material

X

Looking for 2.4GHz RF Wireless Transreveiver Module ?

    country-ico

    We will contact you soon !

    Dileep Jain

    (CEO)

    Rajguru Electronics (I) Private Limited

    Lamington Road, Mumbai, Maharashtra, India

    More Categories

    View All Categories »
    Send SMS
    Contact Us