Send SMS
Contact Us

3D Printer Parts

Version 3.0 CNC Shield

Version 3.0 CNC Shield

Approx. Rs 200 / Piece

Product Description

The CNC Shield makes it easy to get your CNC projects up and running in a few hours. It uses opensource firmware on Arduino to control 4 stepper motors using 4 A4988 Stepper drivers,, with this shield and the Arduino you can build all kinds of robotics or CNC projects including CNC routers,laser cutters and even pick&place machines.

Features

Ramps 1.4 3d Printer Control Board

Ramps 1.4 3d Printer Control Board

Approx. Rs 400 / Number

The RAMPS (RepRap Arduino Mega Shield) is an all-in-one design to fit the necessary components for a 3D printer into one plug in shield for an Arduino MEGA. The plug in shield design includes plug in stepper drivers and extruder control electronics sockets for easy service, part replacement, upgrade-ability and expansion. Additionally, a number of Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack. Ramps boards are the heart of most DIY 3D printers on the market and a nice clean compact way to integrate all the systems into a compact enclosure mountable format.

Features:


Additional Information:

2004 LCD Smart Display Controller Module for RAMPS 1.4

2004 LCD Smart Display Controller Module for RAMPS 1.4

Approx. Rs 650 / Piece

The intelligent controller includes an SD card reader, rotary encoders and a 20-character × 4 line LCD display. You can easily connect it to your RAMPS 1.4 board using "smart adapter" included.
 
This panel connect your RAMPS 1.4, you do not need your computer, your SD card intelligent controller power supply. All further operations, such as calibration, the axis movement can be done only with a rotary encoder intelligent controller. 3D design print without a computer, just use the G code design stored on the SD card.

Features:

12864 Graphic Smart Controller LCD Display for RAMPS 1.4

12864 Graphic Smart Controller LCD Display for RAMPS 1.4

Approx. Rs 750 / Piece


This Smart Controller contains a SD-Card reader, an rotary encoder and a 128x64 LCD display. You can easy connect it to your Ramps board using the "smart adapter". After connecting this panel to your Ramps you don't need your pc any more, the Smart Controller supplies power for your SD card. Further more, all actions like calibration, axes movements can be done by just using the rotary encoder on the Smart Controller. Print your 3D designs without PC, just with a g-code design stored on the SD card.

Compares to the 2004 Smart LCD Controller With Adapter, this 128x64 screen can display much more information, which would help for you run the 3D printer without a computer.

Features:

PCB Heat Bed MK2B 12V/24V For 3D Printer

PCB Heat Bed MK2B 12V/24V For 3D Printer
  • PCB Heat Bed MK2B 12V/24V For 3D Printer
  • PCB Heat Bed MK2B 12V/24V For 3D Printer
  • PCB Heat Bed MK2B 12V/24V For 3D Printer

Approx. Rs 450 / Number


RepRap MK2B Dual Power Supply is a Heated Bed designed for Reprap Prusa and Mendel 3D Printers . It can be used with other 3D Printers too . MK2B is the latest version of the heat bed and features LEDs and 12 / 24V Dual power supply options . This heatbed is etched directly on 35µm copper clad and features uniform even heating and a high heat output .

Details:
Resistance between 1.0 and 1.2 ohm

Microstepping Motor Driver DRV8825 With Heatsink

Microstepping Motor Driver DRV8825 With Heatsink

Approx. Rs 200 / Piece

This breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver features adjustable current limiting, over-current and over-temperature protection, and six microstep resolutions (down to 1/32-step). It operates from 8.2 V to 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling). The driver has a pinout and interface that are nearly identical to those of A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applications.

Specifications:


Additional Information:

Microstepping Motor Driver A4988 With Heatsink

Microstepping Motor Driver A4988 With Heatsink

Approx. Rs 150 / Piece


The A4988 stepper motor driver carrier is a breakout board for Allegro’s A4988 microstepping bipolar stepper motor driver. The driver features adjustable current limiting, overcurrent and overtemperature protection, and five different microstep resolutions (down to 1/16-step). It operates from 8 – 35 V and can deliver up to approximately 1 A per phase without a heat sink or forced air flow (it is rated for 2 A per coil with sufficient additional cooling).

Specifications:

Cartridge Heater 6mm For 3D Printer

Cartridge Heater 6mm For 3D Printer

Approx. Rs 125 / Piece

Increases the reliability of extruder with this heater cartridge and also it heats up faster. It fits nicely in one's extruders, hence is an easy replacement.

Features:

100K OHM NTC Thermistors For Reprap 3D Printer

100K OHM NTC Thermistors For Reprap 3D Printer

Approx. Rs 125 / Number


NTC thermistor for temperature sensor is one where the thermistor chip is welded with leads by alloy soldering process, then partially treated by glass sealing.
The element has a bead form with good stability, small size and rapid response
Widely used in temperature sensors,electronic thermometers and eternity calendar, temperature compensation,various kinds of household appliances as well as Industrial, medical, environmental protection, weather and food processing equipment etc.

Features:

3D Printer Mechanical Limit Switch

3D Printer Mechanical Limit Switch

Approx. Rs 125 / Number


The mechanical endstop uses a lever switch to detect when it is activated . The switch is wired up so that when activated , it pulls the signal to LOW . There is also an LED on the board that will light up when the switch is activated . It uses a standard 4 pin .1" pitch header and accepts a standard , old-style CD-ROM audio connector cable .

Aluminum Flexible Coupling

Aluminum Flexible Coupling

Approx. Rs 175 / Piece


These couplers are made of machined aluminum and have a spiral cut that makes them slightly flexible so they can be fit to two shafts even if they are not perfectly co-linear and will help reduce binding effects.The way they're cut, they're a little springy in the X Y Z linear axis but not in the rotational axis. That means that you won't get increased backlash - so they're suitable for precision CNC work.

Specifications:
Measures 1" x 0.7" diameter / 25mm x 18mm diameter
15 grams

Note : Available as below

T Type Lead Screw Nut

T Type Lead Screw Nut

Approx. Rs 125 / Piece

Features:

Turbo Fan Blower

Turbo Fan Blower

Approx. Rs 175 / Piece


We are leading supplier of Turbo Fan Blower. 3D Printer Turbo Fan Blower 4020 DC 12V 40x40x20mm Cooling Fan 3D Printer Accessory


Features:

Linear Bearing

Linear Bearing
  • Linear Bearing
  • Linear Bearing
Linear Bearings comes with a metal housing.Features:
Linear Motion Ball Bearing

Note : Models Available

NEMA17 Stepper L Clamp For 3D

NEMA17 Stepper L Clamp For 3D
  • NEMA17 Stepper L Clamp For 3D
  • NEMA17 Stepper L Clamp For 3D
  • NEMA17 Stepper L Clamp For 3D

Approx. Rs 150 / Piece

This clamp will fit any NEMA-17 motor (with 31mm hole spacing) with four screws. There's two 30mm long slots, 30mm apart so you can easily attach it. Made of steel with welded 90-degree support triangles, its got a solid construction

Comes with one Clamp and a bag of hardware for attachment:

3D Printer Pen

3D Printer Pen

Approx. Rs 2,350 / Number


The 3D Pen is a tool for freehand drawing of 3D objects . It is compatible with ABS PLA Material . Ergonomic design for optimum handling Durability . Adjustable output speed . Filament colors can be changed easily by pressing a button . LED indicator to check the operating temperature .

Package Includes
1 x 3D Pen1 x 12V 3A Power Adapter1 x Free 1.75mm ABS / PLA Filaments ( Random Colors )1 x User Manual
X
Provide Us More Details
Is this Requirement:

One Time Regular

How soon do you want this:

Immediate After 1 month

Purpose of Requirement:

Reselling End Use Raw Material

X

Looking for 3D Printer Parts ?

    country-ico

    We will contact you soon !

    Dileep Jain

    (CEO)

    Rajguru Electronics (I) Private Limited

    Lamington Road, Mumbai, Maharashtra, India

    More Categories

    View All Categories »
    Send SMS
    Contact Us