Send SMS
Contact Us

DC - DC Convertor Module

BTS7960 43A H-Bridge Stepper Motor Driver Module

BTS7960 43A H-Bridge Stepper Motor Driver Module

Double BTS7960 43A H-bridge High-Power Stepper Motor Driver Module Arduino for Arduino/Robotics

This driver uses Infineon chips BTS7960 composed of high power drive full H-bridge driver module with thermal over current protection. Double BTS 7960 H-bridge driver circuit, with a strong drive and braking, effectively isolating the microcontroller and motor driver! High current 43A.

Features of Double BTS7960 43A H-bridge High-Power Stepper Motor Driver Module: Applications of Double BTS7960 43A H-bridge High-Power Stepper Motor Driver Module:

LM2596 DC-DC Converter Step-Down Power Module

LM2596 DC-DC Converter Step-Down Power Module

Approx. Rs 90 / Piece


This is an LM2596 DC-DC buck converter step-down power module with high-precision potentiometer, capable of driving a load up to 3A with high efficiency, which can work with Freeduino UNO, other mainboards and basic modules. When the output current keeps greater than 2.5A (or output power greater than 10W), please add a heat sink on it.

Specifications:

XL6009 DC-DC Boost Converter Module

XL6009 DC-DC Boost Converter Module

Approx. Rs 125 / Piece

The XL6009 regulator is a wide input range,current mode, DC/DC converter which is capable of generating either positive or negative output voltages. It can be configured as either a boost, flyback, SEPIC or inverting converter. The XL6009 built in N-channel power MOSFET and fixed frequency oscillator, current-mode architecture results in stable operation over a wide range of supply and output voltages.The XL6009 regulator is special design for portable electronic equipment applications.

Need a boost? Using the XL6009 switching boost regulator IC this module can take an input voltage of between 5 and 32V DC and convert it to between 4 and 38V DC.

When using these modules remember that the output current will be a lot less than the input current, (remember - W = VA). For example, if you have a 10V output at 1A from a 5V input, the input current will be around 3.6A. The real-life maximum amount of power you can get out of these things is around 10W. .

To be honest these modules should be used when you don't have any other option, or if you only need a higher voltage at a low current. Otherwise it would be prudent to re-consider the power needs of your project.

Technical Details:

 

XL4015 5A DC-DC Step Down Module with Heatsink

XL4015 5A DC-DC Step Down Module with Heatsink

Approx. Rs 175 / Piece

This product is a 180 KHz fixed frequency PWM buck (step-down) DC/DC module,capable of driving a 5A load with high efficiency,
low ripple and excellent line and load regulation.
The DC/DC buck module has applications where the input voltage is higher than the output voltage , such as battery, power transformer, DIY adjustable regulated power supply, LCD Monitor and LCD TV portable instrument power supplytelecom/networking equipment,24V vehicle notebook power supply,industrial equipment buck. 12V buck to 3.3V, 12V buck to 5V, 24V buck to 5V,24V buck to 12V, 36V buck to 24V etc.

Specifications:

XL4015 5A CC CV Lithium Charger DC-DC Step Down Module

XL4015 5A CC CV Lithium Charger DC-DC Step Down Module

Approx. Rs 200 / Piece

This product is a 180 KHz fixed frequency PWM buck (step-down) DC/DC module,capable of driving a 0-5A (Max) Adjustable load with high efficiency,
low ripple and excellent line and load regulation. Use as a step-down modules with overcurrent protection capabilities
The DC/DC buck module has applications where the input voltage is higher than the output voltage , such as battery, power transformer, DIY adjustable regulated power supply, LCD Monitor and LCD TVportable instrument power supply telecom/networking equipment,24V vehicle notebook power supply,industrial equipment buck. 12V buck to 3.3V, 12V buck to 5V, 24V buck to 5V,24V buck to 12V, 36V buck to 24V etc.
This module has adjustable output Voltage and Current.
Can also be used as a dedicated chaer for Lithium Batteries (Li-Ion,LiPo) as it is capable of CC CV

Applications:

1.Use as a step-down modules with overcurrent protection capabilities

Usage:

(1) Adjust the “voltage potentiometer” so that the output voltage reaches the value you want.

(2) Use a multimeter to measure the output short-circuit current with 10A stalls, while regulating the “current potentiometer” so that the output current reaches a predetermined overcurrent protection value. (For example, the meter displays the current value of 4A, then you can use the module to a maximum current of 4A)

(3) Connect the load.

 

2.Use as a battery charger

Usage:

(1) Make sure you need to charge the battery float voltage and charging current; (if lithium parameters 3.7V/2200mAh, then the float voltage is 4.2V, the maximum charging current 1C, ie 2200mA)

(2) Under no-load conditions, adjust the “Voltage potentiometer” so that the output voltage reaches the float voltage; (if to 3.7V rechargeable lithium battery, the output voltage can be adjusted to 4.2V)

(3) Use a multimeter to measure the output short-circuit current, while regulating the “current potentiometer” so that the output current reaches a predetermined Charging current value.

(4) Factory default is 0.1 times the charging current; (during charging,current is gradually reduced, if the charge current setting is 1A, then when the charge current is less than 0.1A, blue lights turned off, the green light is on, which means that the battery is fully charged)

(5) Connected to the battery charge.

(1,2,3,4 steps as: Output is unloaded, do not connect the battery)

 

3.Use as a LED constant current driver module

Usage:

(1) Adjust the “voltage potentiometer” so that the output voltage reaches the value you want.

(2) Use a multimeter to measure the output short-circuit current, while regulating the “current potentiometer” so that the output current reaches a predetermined LED operating current.

(3) Connect LED, work.

(1,2 steps as: Output is unloaded, do not connect LED)

DC-DC Converter 5A 75W XL4015 LED Module

DC-DC Converter 5A 75W XL4015 LED Module

Approx. Rs 375 / Piece

The DC-DC Adjustable Step Down Converter Module has large power, high efficiency, low-ripple. With power indicator, on-board voltmeter. The voltmeter can calibrate automatically. The measure can be changed between input and output voltage, with indicator. The voltmeter can also be shutdown. The board uses connection terminal for easy wiring.

Features:

Arduino DC-DC Boost Converter 10-32V to 12-35V 6A Step Up

Arduino DC-DC Boost Converter 10-32V to 12-35V 6A Step Up

Approx. Rs 200 / Piece

Product Description

MP1584EN Mini 3A DC-DC Converter

MP1584EN Mini 3A DC-DC Converter

Approx. Rs 90 / Piece

Applications:

DIY mobile power, monitor power supply, power buggies, camera power supply, car power, communications equipment supply, various right size and weight for demanding applications (such as aviation models, etc.).

Specifications:

DC-DC Boost 5v 600ma Output Convertor Module

DC-DC Boost 5v 600ma Output Convertor Module

Approx. Rs 90 / Piece

5V DC regulated output from 0.9 to 5V battery input. Current up to 300mA from single AA battery and up to 600mA from 2x AA battery input with 96% efficiency.

USB-Female connector output for powering various 5V operated USB devices from battery.

Features:

MT3608 2A Max DC-DC Step Up Ultra Small Power Module

MT3608 2A Max DC-DC Step Up Ultra Small Power Module

Approx. Rs 90 / Piece

MT3608 2A Max DC-DC Step Up Power Module Booster Power Module For Arduino

The module features (booster module) :

Digital Voltmeter Ammeter DC 0-100V 10A Monitor Panel

Digital Voltmeter Ammeter DC 0-100V 10A Monitor Panel

Approx. Rs 300 / Number

Specifications:

Wiring Diagram:


Additional Information:
X
Provide Us More Details
Is this Requirement:

One Time Regular

How soon do you want this:

Immediate After 1 month

Purpose of Requirement:

Reselling End Use Raw Material

X

Looking for DC - DC Convertor Module ?

    country-ico

    We will contact you soon !

    Dileep Jain

    (CEO)

    Rajguru Electronics (I) Private Limited

    Lamington Road, Mumbai, Maharashtra, India

    More Categories

    View All Categories »
    Send SMS
    Contact Us