Send SMS
Contact Us

Flex And Force Sensor

Flex Sensor 2.2

Flex Sensor 2.2

Approx. Rs 375 / Piece


A simple Flex Sensor 2.2" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - they claim these sensors were used in the original Nintendo Power Glove. I love the Nintendo Power Glove. It's so bad! The resistance of the flex sensor changes when the metal pads are on the outside of the bend (text on inside of bend). Connector is 0.1" spaced and bread board friendly. Check datasheet for full specifications.

Note: Please refrain from flexing or straining this sensor at the base. The usable range of the sensor can be flexed without a problem, but care should be taken to minimize flexing outside of the usable range. For best results, securely mount the base and bottom portion and only allow the actual flex sensor to flex.

 

FlexiForce Sensor A101

FlexiForce Sensor A101

Approx. Rs 500 / Piece


The FlexiForce A101 is our smallest standard piezoresistive force sensor. The A101 design is optimized for high volume manufacturing and is ideal for embedding into products and applications. This sensor is available off-the-shelf for easy proofof concept. The A101 can be used with our test & measurement,prototyping, and embedding electronics, including the OEM Development Kit, FlexiForce Quick start Board, and the ELF™ System*.You can also use your own electronics, or multimeter.

FlexiForce Sensor A201 - 100lbs

FlexiForce Sensor A201 - 100lbs

Approx. Rs 1,200 / Piece


A201 sensors are trimmable and have a 3-pin male connector. The sensors are available in three force ranges: Low 4.4 N (0 - 1 lb), Medium 111 N (0 - 25 lb) and High 445 N (0 - 100 lb)*. The force ranges stated are approximations. The dynamic range of this small, versatile force sensor can be modified by changing the drive voltage and adjusting the resistance of the feedback resistor.

FlexiForce Sensor A201 - 25lbs

FlexiForce Sensor A201 - 25lbs

Approx. Rs 1,200 / Piece


The FlexiForce A201 is our standard sensor and meets the requirements of most customers. The A201 is a thin and flexible piezoresistive force sensor that is available off-the-shelf in a variety of lengths for easy proof of concept. These ultra-thin sensors are ideal for non-intrusive force and pressure measurement in a variety of applications. This sensor is designed to use with your own electronics or multimeter.

FlexiForce Sensor A301- 25lbs

FlexiForce Sensor A301- 25lbs

Approx. Rs 500 / Piece


The A301 design is optimized for high volume manufacturing and is ideal for embedding into products and applications. This sensor is available in low and high quantities off-the-shelf, ideal for an easy proof of concept. The A301 sensor is designed to use with your own electronics or multimeter.

The A301 is optimized for high volume manufacturing and ideal for embedding into products and applications.

The sensors are available in three force ranges: Low 4.4 N (0 - 1 lb), Medium 111 N (0 - 25 lb) and High 445 N (0 - 100 lb)*. The force ranges stated are approximations. The dynamic range of this small force sensor can be modified by changing the drive voltage and adjusting the resistance of the feedback resistor.

FlexiForce Sensor A301- 1lbs

FlexiForce Sensor A301- 1lbs

Approx. Rs 500 / Piece


The A301 is optimized for high volume manufacturing and ideal for embedding into products and applications.

The sensors are available in three force ranges: Low 4.4 N (0 - 1 lb), Medium 111 N (0 - 25 lb) and High 445 N (0 - 100 lb)*. The force ranges stated are approximations. The dynamic range of this small force sensor can be modified by changing the drive voltage and adjusting the resistance of the feedback resistor. 

Flexiforce Sensor A401 - 25lbs

Flexiforce Sensor A401 - 25lbs

Approx. Rs 725 / Piece


The A401 has a 2-pin connector. This is our standard sensor with the largest sensing area: 25.4 mm (1 in.). A401 sensors are available in one force range: 111 N (0 - 25 lb).* The force ranges stated are approximations. The dynamic range of this large force sensor can be modified by changing the drive voltage and adjusting the resistance of the feedback resistor.

Flexiforce Sensor A502

Flexiforce Sensor A502

Approx. Rs 1,200 / Piece


A502 sensors are square standard sensors with a 2-pin male connector. They have a force range of 0-222 N (0-50 lb), specified with Tekscan electronics. The model is linear through a much lower range of 0-22N (0-5 lb), and is capable of measuring loads up to 44,482 N (10,000 lb).

Flex Sensor 4.5

Flex Sensor 4.5

Approx. Rs 675 / Piece

A simple Flex Sensor 4.5" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - they claim these sensors were used in the original Nintendo power glove. I love the Nintendo Power Glove. It's so bad! The resistance of the flex sensor changes when the metal pads are on the outside of the bend (text on inside of bend). Connector is 0.1" spaced and bread board friendly. Check datasheet for full specifications.

X
Provide Us More Details
Is this Requirement:

One Time Regular

How soon do you want this:

Immediate After 1 month

Purpose of Requirement:

Reselling End Use Raw Material

X

Looking for Flex And Force Sensor ?

    country-ico

    We will contact you soon !

    Dileep Jain

    (CEO)

    Rajguru Electronics (I) Private Limited

    Lamington Road, Mumbai, Maharashtra, India

    More Categories

    View All Categories »
    Send SMS
    Contact Us