Send SMS
Contact Us

Humidity and Temperature Sensor

DHT22 Digital Temperature And Humidity Sensor Module

DHT22 Digital Temperature And Humidity Sensor Module

Approx. Rs 300 / Number


DHT22 capacitive humidity sensing digital temperature and humidity module is one that contains the compound has been calibrated digital signal output of the temperature and humidity sensors. Application of a dedicated digital modules collection technology and the temperature and humidity sensing technology, to ensure that the product has high reliability and excellent long-term stability.

The sensor includes a capacitive sensor wet components and a high-precision temperature measurement devices, and connected with a high-performance 8-bit microcontroller. The product has excellent quality, fast response, strong anti-jamming capability, and high cost.
Standard single-bus interface, system integration quick and easy. Small size, low power consumption, signal transmission distance up to 20 meters, making it the best choice of all kinds of applications and even the most demanding applications.

DHT22 has higher precision and can replace the expensive imported SHT10 temperature and humidity sensor.
It can measure the environment temperature and humidity to meet the high demand.The product has high reliability and good stability.If it's used and combined with special sensor Arduino expansion board,it will be easily implemented the interactive effect which related to the temperature and humidity perception.

Caution: DHT22 digital temperature and humidity sensor is designed for analog sensor interfaces. The analog port will be used as the digital which will not occupy the original digital port of the Arduino.The lines of the sensor which can transform the analog function to digital that can be use on digital port.

Specifications

RCWL-0516 Microwave Radar Sensor

RCWL-0516 Microwave Radar Sensor
  • RCWL-0516 Microwave Radar Sensor
  • RCWL-0516 Microwave Radar Sensor
  • RCWL-0516 Microwave Radar Sensor

Features Specifications Adjustment Part Introduction: Pin Definition:

Additional Information:

DHT22 Digital Temperature And Humidity Sensor

DHT22 Digital Temperature And Humidity Sensor
  • DHT22 Digital Temperature And Humidity Sensor
  • DHT22 Digital Temperature And Humidity Sensor

Approx. Rs 275 / Piece


The DHT22 is a basic, low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and spits out a digital signal on the data pin (no analog input pins needed).

Simply connect the first pin on the left to 3-5V power, the second pin to your data input pin and the right most pin to ground. Although it uses a single-wire to send data it is not Dallas One Wire compatible! If you want multiple sensors, each one must have its own data pin.

Compared to the DHT11, this sensor is more precise, more accurate and works in a bigger range of temperature/humidity, but its larger and more expensive.

Comes with a 4.7K - 10K resistor, which you will want to use as a pullup from the data pin to VCC.

DHT22 Wired (AM2302) Humidity and Temperature Sensor

DHT22 Wired (AM2302) Humidity and Temperature Sensor

Approx. Rs 350 / Piece

Overview

AM2302 output calibrated digital signal. It applys exclusive digital-signal-collecting-technique and humidity sensing technology, assuring its reliability and stability. Its sensing elements is connected with 8-bit single-chip computer.

Every sensor of this model is temperature compensated and calibrated in accurate calibration chamber and the calibration-coefficient is saved in type of programme in OTP memory, when the sensor is detecting, it will cite coefficient from memory.
Small size & low consumption & long transmission distance(100m) enable AM2302 to be suited in all kinds of harsh application occasions. Single-row packaged with four pins, making the connection very convenient.

Specification

Model

AM2302

Power supply

3.3-5.5V DC

Output signal

digital signal via 1-wire bus

Sensing element

Polymer humidity capacitor

Operating range

humidity 0-100%RH; temperature -40~80Celsius

Accuracy

humidity +-2%RH(Max +-5%RH); temperature +-0.5Celsius

Resolution or sensitivity

humidity 0.1%RH; temperature 0.1Celsius

Repeatability

humidity +-1%RH; temperature +-0.2Celsius

Humidity hysteresis

+-0.3%RH

Long-term Stability

+-0.5%RH/year

Interchangeability

fully interchangeable

Dht11 Temperature And Humidity Sensor

Dht11 Temperature And Humidity Sensor

Approx. Rs 125 / Piece


DHT11 is an inexpensive sensor that provides calibrated digital outputs for ambient temperature and relative humidity. It comes in a single row 4-pin package and operates from 3 to 5.5V power supply. It can measure temperature from 0-50 °C with an accuracy of ±2°C and relative humidity ranging from 20-95% with an accuracy of ±5%. It has got its own proprietary 1-wire protocol, and therefore, the communication between the sensor and a microcontroller is not possible through a direct interface with any of its peripherals. The protocol must be implemented in the firmware of the MCU through bit-banging of an I/O pin.

Low-cost temperature and humidity sensor. Requires a single digital I/O pin to read both temperature and humidity values. Details:

Dht11 Temperature And Humidity Sensor Module

Dht11 Temperature And Humidity Sensor Module

Approx. Rs 150 / Piece

Description:-
This is a very popular, ultra low cost digital temperature and humidity sensor. It uses a capacitive humidity sensor, and a thermistor to measure the surrounding air temperature. The result is available via a digital signal on the data pin (no analog input pins needed). Its fairly simple to use, but requires careful timing to grab data. The only real downside of this sensor is you can only get new data from it once every 2 seconds. But, for most applications this is not an issue at all.

This module should be connected as follows:

Although it uses a single-wire to send data it is not Dallas One Wire compatible! If you want multiple sensors, each one must have its own data pin!

The DHT11 is a low cost version of the DHT22 sensor. The more expensive DHT22 is more precise, more accurate and works in a wider temperature and humidity range.

Specifications

 

Humidity and Temperature Sensor with Direct Output

Humidity and Temperature Sensor with Direct Output

Approx. Rs 300 / Piece(s)

Specification:

Input Voltage range : DC 5.0 ( -) 0.2V
Output Voltage Range : DC 1.0 - 3.0V
Measurement Accuracy : ( -) 5% RH
Operating Current (Maximum) : 2mA
Storage RH Range : 0 to 99% RH
Operating RH Range : 20 to 95% (100% RH Intermittent)
Transient Condensation :<3% RH
Temperature Range :
Storage - -20°C to 70°C
Operating - 0°C to 50°C
Hysteresis (RH @25°C) : MAX 2%RH
Long term Stability (Typical drift per year) : 1.5%
Linearity : Linearity
Time response (63% step change) : 1 min
Dimensions (L*W) : 3mm * 2mm

LM35 Temperature Sensor

LM35 Temperature Sensor

Approx. Rs 75 / Piece

LM35 series Temperature Sensor is a precisely integrated circuit whose voltage output is linearly proportional to the centigrade temperature. These sensors have an added advantage over kelvin calibrated sensors and do not require the subtracting of constant voltage from its output to obtain convenient centigrade scaling. Our product need not to be calibrated or trimmed to normal accuracy of ±1/4 °C at room temperature and ±3/4°C over a full -55 to 150°C temperature range.The low output impedance, linear output, and precise inherent calibration of these temperature sensors makes the interfacing to readout or control circuitry easily.These sensors can be used with single, plus or minus power supplies because it draws only 60 mA from its supply and has very low self-heating, less than 0.1°C in still air.

 

Features of our offered Temperature Sensor are as follows:



Additional Information:

DS18B20 Temperature Sensor Module For Arduino

DS18B20 Temperature Sensor Module For Arduino
  • DS18B20 Temperature Sensor Module For Arduino
  • DS18B20 Temperature Sensor Module For Arduino

Approx. Rs 125 / Piece


This Digital temperature sensor DS18B20 will tell you, with 9 to 12 bit resolution! Uses only 1 wire to the Arduino or other microcontroller for communication. With the One Wire protocol, you can operate a large number of these sensors from one Arduino pin. Simple to use and highly accurate. Measures temperatures from -55°C to 125°C (-67°F to 257°F).

Features:

Additional Information:

DS18B20 Waterproof Temperature Sensor

DS18B20 Waterproof Temperature Sensor

Approx. Rs 125 / Piece

Overview

This is a Waterproof DS18B20 Temperature Sensor/Thermometer. The probe uses original DS18B20 temperature sensor chip. It is waterproof, moisture-proof and anti-rust with the high-quality stainless steel tube encapsulated. No other components, unique single bus interface.

Specification

XH- W1209 DC 12V -50 to 110 Temperature Control Switch

XH- W1209 DC 12V -50 to  110 Temperature Control Switch

Approx. Rs 275 / Piece

Specification:

XH-W1401 Intelligent Digital Thermostat Temperature Control Sensor

XH-W1401 Intelligent Digital Thermostat Temperature Control Sensor
  • XH-W1401 Intelligent Digital Thermostat Temperature Control Sensor
  • XH-W1401 Intelligent Digital Thermostat Temperature Control Sensor
  • XH-W1401 Intelligent Digital Thermostat Temperature Control Sensor

Approx. Rs 300 / Piece

Products Electrical Characteristics:

 

Instructions for use:
Start indicator: START ( red ) indicator light, said relay device to work.
Stop lights: STOP ( green ) light is on, the relay off, the device stops working.

Digital tube:

X
Provide Us More Details
Is this Requirement:

One Time Regular

How soon do you want this:

Immediate After 1 month

Purpose of Requirement:

Reselling End Use Raw Material

X

Looking for Humidity and Temperature Sensor ?

    country-ico

    We will contact you soon !

    Dileep Jain

    (CEO)

    Rajguru Electronics (I) Private Limited

    Lamington Road, Mumbai, Maharashtra, India

    More Categories

    View All Categories »
    Send SMS
    Contact Us