Send SMS
Contact Us

Sensors

Digital LCD Temperature Thermometer with Sensor

Digital LCD Temperature Thermometer with Sensor

Approx. Rs 175 / Number

Modeling simple, elegant, LCD panels inline connections, moisture-resistant,
strong anti-interference, applies to refrigerated cabinets, display counters and
other needs of temperature measurement and display of various equipment.
Submerge probe into fish tank to measure water temperature (Submerge probe only, do not submerge thermometer in water)

Description:

HX711 Module Weighing Pressure Sensor

HX711 Module Weighing Pressure Sensor

Approx. Rs 90 / Piece

Description:

The module uses 24 high-precision A / D converter chip hx711, is designed for high-precision electronic scale and design, with two analog input channels, the internal programmable gain amplifier integrated multiplier 128.
The input circuit can be configured to provide an electrical bridge the bridge voltage (e.g., pressure, weight) sensor mode.

The input circuit can be configured to provide a bridge voltage electrical bridge (such as pressure, weight) sensor model is an ideal high-precision sampling front-end modules; Comprehensive error (% F.S): 0.05; Sensitivity (mv / v): 1.0 ± 0.1; Zero output (mv / v): ± 0.1; Input Resistance (ohm): 1000 ± 50; Output Resistance (ohm): 1000 ± 50; Insulation Resistance (Mohm): 2000 (100VDC); Recommended voltage (V) :5-10V; Operating temperature range ('C): ~ 10 - +15; Overload (% F.S): 150

Hall Effect Sensor A1104

Hall Effect Sensor A1104

Approx. Rs 75 / Piece


The Allegro A1101-A1104 and A1106 Hall-effect switches are next-generation replacements for the popular Allegro 312x and 314x lines of unipolar switches. The A110x family, produced with BiCMOS technology, consists of devices that feature fast power-on time and low-noise operation. Device programming is performed after packaging, to ensure increased switch point accuracy by eliminating offsets that can be induced by package stress. Unique Hall element geometries and low-offset amplifiers help to minimize noise and to reduce the residual offset voltage normally caused by device overmolding, temperature excursions, and thermal stress.

The A1101-A1104 and A1106 Hall-effect switches include the following on a single silicon chip: voltage regulator, Hall-voltage generator, small-signal amplifier, Schmitt trigger, and NMOS output transistor. The integrated voltage regulator permits operation from 3.8 to 24 V. The extensive on-board protection circuitry makes possible a ±30 V absolute maximum voltage rating for superior protection in automotive and industrial motor commutation applications, without adding external components. All devices in the family are identical except for magnetic switching levels.


Additional Information:

Laser Dot Diode Module Red Copper Head Tube

Laser Dot Diode Module Red Copper Head Tube

Approx. Rs 75 / Piece

650nm 5mW 6mm Laser Dot Diode Module Red Copper Head Tube

Features:

Magnetic Door Contact Switch

Magnetic Door Contact Switch

Approx. Rs 80 / Number

A Magnetic Contact is an electrically controlled switch used for switching a power circuit, similar to a relay. Magnetic contacts give exact position of the door (open/close).

Specifications:

Metal Detector

Metal Detector

About 

Metal Detector with speaker and ttl output.

Features And Usage 

Note: it will not detect coins if it is in the middle of the coil, it may detect if it is close to the coil. it will not detect any type of explosives.

 

Microwave Sensors Modules HB100

Microwave Sensors Modules HB100

Approx. Rs 350 / Piece

Miniature Microwave Motion Sensor is a X-Band Bi-Static Doppler transceiver module. Its built-in Dielectric Resonator Oscillator (DRO) and a pair of Microstrip patch antenna array, make it ideal for OEM usage in motion detection equipment. This module is ideally suitable for false alarms reduction in intruder detectors when work together with Passive Infrared (PIR) sensor. It can also be used for auto-door opening and vehicle speed measurement.

Specifications:

Additional Information:

PH Tester Soil Water Moisture Light Test Meter Sensor

PH Tester Soil Water Moisture Light Test Meter Sensor

Approx. Rs 450 / Piece


Specifications:


Features:

PIR Motion Detector Module HC-SR501

PIR Motion Detector Module HC-SR501

Approx. Rs 100 / Piece

The PIR (Passive Infra-Red) Sensor HC-SR501 is a pyroelectric device that detects motion by measuring changes in the infrared levels emitted by surrounding objects. This motion can be detected by checking for a high signal on a single I/O pin.

Module provides an optimized circuit that will detect motion up to 6 metres away and can be used in burglar alarms and access control systems.

The PIR sensor and Fresnel lens are fitted onto the the PCB. This enables the board to be mounted inside a case with the detecting lens protruding outwards, whilst still allowing easy access to the controls inside the case.

PIR Motion Detector Module Features

• Settling time: 60 seconds
• Compact size (24 x 32 mm)
• Supply Voltage: DC3V-5V
• Current drain :< 50uA
• Voltage Output: High/Low level signal: 0-3.3V
• High sensitivity
• Delay time: 5s-18 minute(as customer requirement)
• Operation Temperature: -15oC -70 oC
• Infrared sensor: dual element, low noise, high sensitivity
• Light sensor: CdS photocell (can be add as customer requirement


Additional Information:

Photoelectric Switch HY860D

Photoelectric Switch HY860D

Approx. Rs 50 / Piece


Photoelectric Switch HY860D Features a built-in bracket for easy mounting. Consisted of an infrared emitter and a phototransistor, is located face-to-face on the optical axes in a leaded package. During operation, output phototransistor switch from ON state to OFF state when object is inserted into gap between emitter and sensor. HY860D is used for object detection and automatic counting, such as printer, scanner, copy machine, facsimile machine and vending machine, etc.

Piezo Vibration Sensor

Piezo Vibration Sensor

Approx. Rs 300 / Piece

Description: This basic Piezo Vibration Sensor from Measurement Specialties is often used for flex, touch, vibration and shock measurements. A small AC and large voltage (up to /-90V) is created when the film moves back and forth. A simple resistor should get the voltage down to ADC levels. Can also be used for impact sensing or a flexible switch. Comes with solderable crimp pins and a mass attached to the tip. This mass increases the sensitivity to motion.

 

Features:

 


Additional Information:

Sharp Optical Dust Sensor - Gp2y1010au0f

Sharp Optical Dust Sensor - Gp2y1010au0f

Approx. Rs 450 / Piece

The Sharp Optical Dust Sensor (GP2Y1010AU0F) is especially effective in detecting very fine particles like cigarette smoke, and is commonly used in air purifier systems.

Features:

Soil Moisture Detection Module

Soil Moisture Detection Module

Approx. Rs 80 / Piece

This is a simple and easy moisture sensor that can be used for the detection of soil moisture. The module outputs a high level, when soil moisture is deficit, the output is low level. Using the sensor produces a watering device automatically, let you don't choose and employ persons to manage the plants in the garden.

Soil Moisture Sensor Features:

Turbidity Sensor TSD-10

Turbidity Sensor TSD-10

Approx. Rs 750 / Piece

The TSD-10 module measures the turbidity (amount of suspended particles) of the wash water in washing machines and dishwashers. An optical sensor for washing machines is a measuring product for a turbid water density or an extraneous matter concentration using the refraction of wavelength between photo transistor and diode. By using an optical transistor and optical diodes, an optical washing machine sensor measures the amount of light coming from the source of the light to the light receiver, in order to calculate water turbidity.

Specifications

Ultrasonic Distance Sensor HC-SR-04

Ultrasonic Distance Sensor HC-SR-04

Approx. Rs 100 / Piece

The HC-SR04 is an inexpensive ultrasonic distance sensor that works out of the box with an Arduino.

Specifications:


Additional Information:

Water Float Sensor

Water Float Sensor

Approx. Rs 125 / Piece

Description

Float Sensor is an electrical ON/OFF Switch, which operates automatically when liquid level goes up or down with respect to specified level. The Signal thus available from the Float Sensor can be utilized for control of a Motor Pump or an allied electrical element like Solenoid, Lamps, and Relays etc.

Float Sensors contain hermetical sealed Reed Switch in the stem and a permanent Magnet in the Float. As the Float rises or falls with the level of liquid the Reed Switch is activated by Magnet in the Float.

working:

Available either Normally Open, Normally Close, Change Over Contact Form.

Application:

House hold Equipments such as overhead water tanks,Water purifiers.

Water Float Switch - P43

Water Float Switch - P43

Approx. Rs 100 / Piece

A float switch is a device used to sense the level of liquid within a tank, it may actuate a pump, an indicator, an alarm, or other device.

A float switch is a device used to sense the level of liquid within a tank. The switch may actuate a pump, an indicator, an alarm, or other device. Use them with hydroponics, saltwater tank, freshwater tank, gardening, aquariums for power head control, pet bowls, fish tanks, filtration, heating, pumps, ponds, basement alarms, boats, air condition drain pans, pressure washers, carpet cleaning mach, reef aquarium, fluid control, ice machines, coffee pots, marine, automotive, automobiles, tropical fish tanks, evaporator coils, condensation line, in relays, or what ever your project may be. It can be easily converted from normally open to normally close by invertin the float.

Note:
because the current that the switch can carry is much little(0.5A), you must use a relay or contactor when it is connected by a load, relay and contactor are not included here.

Description:
Use them with hydroponics, saltwater tank, freshwater tank, gardening, aquariums for power head control, pet bowls, fish tanks, filtration, heating, or what ever your project may beUp float switch Contains no mercury Product

Specification:

Water Solenoid Value

Water Solenoid Value

Approx. Rs 300 / Piece


Specifications:

Digital Timer

Digital Timer

Approx. Rs 500 / Piece


Features:

Additional Information:

DHT12 Sensor Module

DHT12 Sensor Module
Description :-
Package Contents :-

X
Provide Us More Details
Is this Requirement:

One Time Regular

How soon do you want this:

Immediate After 1 month

Purpose of Requirement:

Reselling End Use Raw Material

X

Looking for Sensors ?

    country-ico

    We will contact you soon !

    Dileep Jain

    (CEO)

    Rajguru Electronics (I) Private Limited

    Lamington Road, Mumbai, Maharashtra, India

    More Categories

    View All Categories »
    Send SMS
    Contact Us