Send SMS
Contact Us

Shield For Arduino

D1 Mini Nodemcu WIFI ESP8266

D1 Mini Nodemcu WIFI ESP8266
  • D1 Mini Nodemcu WIFI ESP8266
  • D1 Mini Nodemcu WIFI ESP8266
  • D1 Mini Nodemcu WIFI ESP8266

The development board is based on the WiFi-SoC ESP8266 and is made for fast Internet-of-Things (IoT) prototyping. It is flashed with the NodeMCU firmware and can be set up and programmed right away with the on-board microUSB connection. With only few lines of code the NodeMCU Dev Kit is connected to your local network and ready to be controlled by other network members like computers and smartphones. The D1 mini is a mini wifi board based on ESP-8266EX. Features: -11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire supported(except D0) -1 analog input (3.3V max input) -A Micro USB connection

Additional Information:

Ethernet Shield W5100 for Arduino

Ethernet Shield W5100 for Arduino

Approx. Rs 475 / Piece

Specification:

L293D Based Arduino Motor Shield

L293D Based Arduino Motor Shield

Approx. Rs 200 / Piece

This Arduino compatible motor Driver shield is a full-featured products that it can be used to drive 4 DC motors or two 4-wire stepper and two 5V 'hobby' servo. It drive the DC motor and stepper with the L293D, and it drive the servo with Arduino's pin9 and pin10.

Features:

Prototype Shield V3 Mini Bread Board For Arduino MEGA

Prototype Shield V3 Mini Bread Board For Arduino MEGA

Approx. Rs 200 / Piece


Description

The board can not only receive MEGA seamless plug controller, directly soldered to the above components to complete a variety of prototype circuit, you can paste Mini bread board, through the 7-color jumper to complete a variety of circuit experiment , board integrated power indicator and status lights, and reset buttons, easy to learn MEGA preferred prototype controller expansion board.

Technical Specifications

Prototype Shield with Breadboard for Arduino UNO

Prototype Shield with Breadboard for Arduino UNO

Approx. Rs 175 / Piece

Description:

ProtoShield is used in conjunction with Arduino Duemilanove.

Used to build a circuit prototype, can be directly soldered components on the board.
Can also be connected through the mini breadboard circuit.
1 reset button, 1 general use button, and 2 LED circuits can be used directly.
5V, GND, and Raw pins are exposed as well.
The mini breadboard has 170 tie points.
SOIC place for IC.
The breadboard sticks on the prototype shield with its self-adhesive backing.

Specification:


USB Host Shield for Arduino

USB Host Shield for Arduino

Approx. Rs 750 / Piece

The USB Host Shield contains all of the digital logic and analog circuit necessary to implement a full-speed USB peripheral/host controller with Arduino. User can use the Arduino to connect and control any USB slave device easily.

Features
Specifications
Operating Voltage5V
USB ControllerMAX3421E
Max Current500mA when Arduino is powered by a suitable power supply connected to the Arduino power jack
Max Current400mA when Arduino is powered by its USB port

LCD

LCD

Approx. Rs 250 / Piece

Description: This is a 16x2 LCD and Keypad shield for Arduino Uno, Diecimila, Duemilanove and Freeduino boards. to provide a user-friendly interface that allows users to go through the menu, make selections etc. It consists of a 1602 white character blue backlight LCD. The keypad consists of 5 keys — select, up, right, down, left and reset. To save the digital IO pins, the keypad interface uses only one ADC channel. The key value is read through a 5 stage voltage divider.

Specifications:

2.4 inch LCD TFT Display

2.4 inch LCD TFT Display

Approx. Rs 425 / Piece

Features:


Package included:

1 x 2.4 inch TFT LCD Shield

Multi - Function Shield

Multi - Function Shield

Approx. Rs 250 / Piece


The APPC220 Bluetooth Voice Recognition Module has a wide range of features which makes it perfect for beginners who want to study. It can be useful for advanced users because it has built-in general purpose components:

Unit

PIN #

4 red LEDs

10, 11, 12, 13

3 buttons + reset button

A1, A2, A3

Potentiometer (10 kOhm)

A0

4-digit 7-sement LED tube driven by 74HC595

Latch 4, Clock 7, Data 8

Buzzer (loud speaker/beeper)

3 (digital On/Off)

Socket for infrared receiver (remote control)

2

Socket for temperature sensor LM35 or DS18B20

A4

Header for APC220 shield

GND, +5v, 0, 1 (rx/tx)

Free pins (pwm)

5, 6, 9, A5


Additional Information:

Data Logger Shield for Arduino

Data Logger Shield for Arduino

Approx. Rs 300 / Piece

Features:

SD card interface works with FAT16 or FAT32 formatted cards.
3.3V level shifter circuitry prevents damage to your SD card.
Real time clock (RTC) keeps the time going even when the Arduino is unplugged.
Included libraries and example code for both SD and RTC, means you can get going quickly.
Prototyping area for soldering connectors, circuitry or sensors.
Onboard 3.3V regulator is both a reliable reference voltage and also reliably runs SD cards that require a lot of power to run.
Works with Arduino UNO, Duemilanove, Diecimila, Leonardo or ADK/Mega R3 or higher.
ADK/Mega R2 or lower are not supported.

Specification:

Arduino Wifi ESP13 Web Sever Serial Wi-Fi Expansion Shield

Arduino Wifi ESP13 Web Sever Serial Wi-Fi Expansion Shield

Approx. Rs 750 / Piece


Features:

1. WiFi using industrial-grade ESP8266 chips, modules for ESP13 with metal shield, strong anti-interference ability;
2. standard pin compatible with the Ar-duin Uno, Me ga2560, such as main control board, a voltage conversion chip is used to connect with the Ar-duin Uno, 3.3V and 5V compatible;
3. a serial port using dual dial the code switch to control, makes the extension board can separate as Ar-duin Uno extended board is used, can also be used as ESP8266 extension plate;
4. Real serial WiFi, the Ar-duin program without any configuration;
5. WiFi based on the Web Server configuration parameters and serial port;
6. Can be used as an independent ESP8266 development board, download the official firmware the AT command, Node MCU open-source firmware, etc;
7. Can be used as an independent Ar-duin Uno expansion board, pins all leads.

Specifications:
1. Support wireless 802.11 b/g/n standard;
2. Support the STA/AP two working mode;
3. Built-in TCP/IP protocol stack, you can configure a socket;
4. Support the standard TCP/UDP Server and Client;
5. A serial port baud rate support: 1200/2400/4800/9600/4800/9600/57600/74800/115200 BPS.
6. A serial port data bits: 5/6/7/8;
7. Serial ports, parity: no;
8. Serial ports, stop bit: 1/2;
9. Standard Ar-duin UNO, Me ga pin spacing;
10. Which leads to the Ar-duin Pin 2/3/4/5/6/7/8/9/10/11/12/13;
11. Which leads to the ESP8266 GPIO 0/2/4/5 9/10/12/13/14/15/16 / ADC/EN/UART TX/UART RX.
12. RESET RESET;
13. KEY buttons reuse configuration function;
14. Two dial the code switch to realize the Ar-duin and ESP8266 serial port extension switch;
15. WiFi working current: continue to send: material 70 ma 200 ma (MAX), standby: < 200 ua;
16. Wireless transmission rate: 110-460800 BPS
17. Working temperature: - 40 + 125
18. Modules weight: about 20 g

Arduino Compatible WEMOS D1 R2 WIFI ESP8266 Shield

Arduino Compatible WEMOS D1 R2 WIFI ESP8266 Shield

Approx. Rs 450 / Piece


The D1 R2 is a WiFi capable ESP8266EX based development board in the form of the common Arduino UNO board format. This board is compatible with the Arduino IDE and with NodeMCU. The D1 R2 also features an on-board switching power supply which allows you to power the board from a power supply up to 12V.

*Note: The D1 R2 is a 3.3V device. If you connect it to 5V digital sensors or devices you will need a logic level converter.

Specifications:

X
Provide Us More Details
Is this Requirement:

One Time Regular

How soon do you want this:

Immediate After 1 month

Purpose of Requirement:

Reselling End Use Raw Material

X

Looking for Shield For Arduino ?

    country-ico

    We will contact you soon !

    Dileep Jain

    (CEO)

    Rajguru Electronics (I) Private Limited

    Lamington Road, Mumbai, Maharashtra, India

    More Categories

    View All Categories »
    Send SMS
    Contact Us